Arduino Boards
150V 20A Lithium Battery Voltage Ammeter Battery Capacity DC Power Meter Detector
$25.72
Technical Parameters:
| Input Interface / Output Interface: 20A high-current screw-type terminal | |
| Voltage measurement range: 0.00V-150V | Resolution Accuracy: 0.05V |
| Current measurement range: 0.00A-20.0A | Resolution Accuracy: 0.05A |
| Accumulated capacity range: 0-999.999AH | Resolution accuracy: 0.01AH |
| Cumulative power range: 0-99999.9WH |
Resolution accuracy: 0.01WH |
| Power measurement range: 0-9999.99W | Resolution accuracy: 0.01W |
| Impedance measurement range: 1-99.9Ω | Resolution accuracy: 0.01Ω |
| Temperature measurement range: 0-99 °C | Resolution accuracy: 1 °C |
| Timing: 999 hours 59 minutes 59 seconds | Resolution accuracy: 1 second |
| Timer measurement reminder settings: 24 hours countdown any set value | |
| Small current standby threshold reminder parameters: <2W / 0.5 hours | |
|
Small voltage measurement power supply requirements:
|
When measuring the low voltage of < 5V, please supply the independent power supply |
| When measuring the voltage of DC 4-30V, please power supply to the measuring system | |
| Refresh time: > 500MS / TIMES | |
| Measurement rate: about 0.5 times / second | |
|
Over-voltage over-current setting alarm mode: display warning interface to remind the user
|
|
| Over-voltage reminder setting range: 1-300V | |
| Low pressure reminder setting range: 0-290V | |
| Overcurrent reminder setting range: 0.2-150A | |
| Display type: LCM black fonts, green backlight, English display | |
| Product size: 48 x 29 x 22mm | |
| Current consumption: <0.02A | |
| Operating temperature: -10 to 60 ° C | |
| Working humidity: 10-80 (NO DOUBT) | |
| Working pressure: 80-106KPA | |
Package includes:
1 x Lithium Battery Voltage Ammeter
