Product parameters:
1. Using full-bridge driver chip + low-pass internal resistance 55V110A NMOS, can achieve positive and negative motor
2. Two PWM input, duty cycle can be adjusted within 0-100%, with instant braking capability
3. Working voltage 10V-40V, power 170W the following
4. Control is extremely simple and convenient, only three input lines to control the motor
5. Chip built-in dead zone hardware control, better able to adapt to frequent commutation to reduce the tube's own loss
6. The back of the module is tin-plated, allowing the wires to flow through larger currents
7. Support 5V, 3.3V logic input. Suitable for all types of single-chip IO port direct control, you can also control the motor input through the analog input
8. Board size: 38.8 * 67.5mm
Instructions for use:
IN1 = 1, IN2 = 0; motor forward;
IN1 = 0, IN2 = 1; motor reversal;
IN1 = 0, IN2 = 0; Motor brake.
Package included:
1 x 170W High Power H-Bridge Drive Board