DC 3.7-6V 20KV 0.5A High Voltage Pulse Generator High Voltage Igniter Module Arc Lighter Core Module

Description:

Input voltage: DC 3.7-6V

Input current: 0.5A

Output voltage: about 20KV (please pay attention to safety when used)

High voltage type: pulse DC type

Output current: 0.5A

Input cable length: about 10cm

Output line length: about 10cm

High voltage two pole ignition distance: 0.5cm

Volume: 2 x 2 x 2cm

Matters needing attention:

Note: This product is connected with the input end of 3.7V-6V power supply, output two terminal can produce 0.5 cm long purple high-temperature arc, instant paper cigarette lighter, single high-voltage lines also can be of any metal body discharge, work no discharge sound loud clap.

About input power: you can use single 3.7V lithium batteries or two series, such as 18650 battery, mobile phone battery idle (to remove the protection plate, the proposed capacity is more than 2000mAh) or NiCd / NiMH batteries, lead-acid batteries and other 4V or 6V (6V battery can achieve the best effect)

Modules used for attention:

1. The high voltage module should avoid the use of electricity when no load is high. Before switching on, the proper distance of the high voltage wire must be adjusted. The distance between the high voltage wire and the battery is directly proportional to the battery voltage and capacity.

2. The test of the distance of the arc is from the short to the long experiment, and It is forbidden to exceed the longest arc distance. Because the high voltage energy can not be released, it is very easy to damage the module.

3. The power of the module is large, it is not suitable for heat dissipation, so it can not work for a long time.

4. The method of judging whether the capacity of the battery can drive the maximum output power is to measure the voltage of the battery when the arc is drawn. If it is around 6V, the maximum power can be output.

5. The small capacity of the two series lithium 7.2V, arc voltage measurement in the state has fallen to about 4V, the smaller the voltage of the capacity is low. It is recommended to use more than 2000MA of lithium, the best conditions with more than 4000MA battery.

Package included:

1 x High voltage module