Digital Display 18650 Li-ion Lithium Battery Mobile Power Capacity Tester Meter Discharge Load

Features:

– View the test capacity, test time, and the current voltage
1.Press ON / OFF Key to enter the test status (working conditionLEDLights flash)
2.Work DOWN And UP Key to switch the display, respectively, view the current voltage (V), The capacity of the test (AH), Test time (Hour),Shows the
   voltage drops below the set voltage, automatically switches to the test completion status.
3. Press ON / OFF Bond 3 Seconds, then empty the test data back to standby.

– Illustration
   Example: Testing a18650Lithium battery capacity, the minimum discharge voltage is set3.00V, The discharge current is set to 1A.
1.USB 5V Power supply, the module enters the standby state.
2.Load 18650 Lithium battery, the module shows the battery voltage.
3.Press SET Button, LED indicator light flashes, with DOWN,UPKey to set the minimum cut-off discharge voltage and discharge current,3.00V,1A.
4.Press ON / OFF Button to save the settings.
5.The current access the battery voltage is displayed, press ON / OFF Button to start the discharge, work status LED Lights flashing, battery voltage
   slowly drop, after the voltage drops below the set stop discharging into the test completion status.
6.Buzzer, work status LED Light Always.
7.Shows the voltage will rise,Down And UP Key to toggle the display of data access test results.
8.Press ON / OFF Key data is cleared to return to standby

– Precautions
1.When the battery is discharged, do not set the battery voltage 0.00V Avoid battery damage
2.Maximum test voltage 8.99V Do not exceed this voltage. Test voltage range:0.01V ~ 8.99V
3.Testing process Press ON / OFF Key to switch to the test completion status
4.Battery discharge time (Hour) Is the longest:9.59H Here's the time format:9.59H Expressed 9 Hour 59Points. Discharge time:0.00H ~ 9.59H
5.The maximum capacity of the battery (AH) Is:99.9AH Battery capacity range:0.00AH ~ 99.9AH
6.Discharge process, when the temperature is higher than 60℃ Cooling fan to work, less than 40℃ When the fan stops
7.5V USBAfter working state power LED Lights in three ways:
    Work like Off: Standby
    Work like lights flash: being tested
    Work like lights lit: the test is completed, the buzzer alarm

Package included:

1 x 18650 Li-Ion Lithium Battery Mobile Power Capacity Tester