There are six kinds for your choice:
A: Gold Chassis
B: Gold Chassis + Espduino kit
C: Gold Chassis + NodeMcu Lua kit
D: Silver Chassis
E: Silver Chassis + Espduino kit
F: Silver Chassis + NodeMcu Lua kit
Introduction:
This tank chassis named C300 can be controled by ESPduino development kit, which is completely compatible with Arduino UNO R3 attached with WIFI module. When you get it, you can remote control the tank chassis by using the WIFI mode after you install the car chassis. By using ESPduino development board kit, you can control the 2-way motor and 16-way servos at the same time. So this kit is usually use to control the mobile robot arm.
Specifications:
Name: C300 Smart track car chassis
Material: aluminum alloy
Wheel hub: metal
Wheel: rubber
Product size: about 200*120*70mm (length * width * height)
Color:golden / silver
Motor Parameters:
Name: 25mm gear motor
Output speed: 150±10%rpm
No_load current: 200mA (Max)
Stall current: 4500mA(max)
Stall torque: 9.5kgNaN
Rated speed: 100±10%rpm
Rated torque: 3000gNaN
Rated current: 1200mA (Max)
Noise :56dB
Working voltage: 9V
Outside Shaft Length: 14.5mm
Shaft End Play: 0.05-0.50mm
Screw Size:
Diameter Of Shaft phi 4mm, D3.5
Encoder: 2pulses/circle
Working voltage for sensor: 3-5V
Note:
This is DIY kit and unassemble kit.
Package included:
1 set car chassis with motor
