DIY JGA25-360 12V 1.25W Two Wheel Self Balancing Smart Robot Car Metal Frame Chassis Kit

Parameter:

– Dimensions: 217x72x72mm
– Weight: 508g
– Output pulse: 360cpr / circle
– Voltage range: 6-24V
– Rated voltage: 12V
– No-load speed: 201rpm / m
– No-load current: 50mA
– Load torque: 0.53kg * cm
– Rated power: 1.25W
– Load current: 300mA

Wire connection:

– Two yellow wires on the left represent two poles of the motor
– The green and white wire are pulse output wires, you can just connect one of them in theory, connecting both of them can measure the turn of the motor
– The red and black is for encoder wiring, red for positive, black for negative, voltage is 3.3V~5V

Note:

– Do NOT connect the red and black wire wrongly, or it will burn the encoder.
– Wire on the other side of the motor has changed into Dupont head 2.54 pitch, general pin can be used.

Package included:

1 x Car Chassis
2 x JGA25-360 Motor
2 x 25MM Motor Bracket
2 x 17-4MM Couplings
2 x 72MM Wheel
2 x 3MM Acrylic Chassis
4 x 12MM Copper Pillar
4 x 30MM Copper Pillar