Raspberry Pi
DIY Super Starter Experimental Platform Kit With Python Motor For Raspberry Pi 3 Pi 2 Model B/B+
$58.38
Features:
1. Provides you tutorials to learn about Raspberry Pi, designed for beginners (also experienced hobbyists)
2. With Breadboard, Male to Female Bread cable, T type 40P GPIO
3. This is a Experimental Platform For Raspberry Pi 3 Pi 2 Model B/B+
4. With Python Motor
Notes: The Raspberry Pi board is not included.
Package Included:
| 1x RC522 RFID Module | 1x Tilt Switch |
| 1x ID Card | 2x Switch |
| 1x Special-shaped ID Card | 1x RGB LED |
| 1x LCD1602 | 8x Red LED |
| 1x PS2 Joystick Module | 4x Green LED |
| 1x Ultrasonic Distance Sensor Module | 4x Yellow LED |
| 1x Triaxial Accelerometer Sensor Module (ADXL345) |
4x Blue LED |
| 1x DHT-11 (Digital Temperature & Humidity sensor) |
4x Button (large) |
| 1x ADC0832 | 5x Button (small) |
| 1x Stepper Motor | 1x Button cap (red) |
| 1x Stepper Motor Driver Module (Based on ULN2003A) |
1x Button cap (white) |
| 1x L9110 motor driver | 2x Button cap (blue) |
| 1x DC Motor | 16x Resistor(220Ω) |
| 1x 4*4 Matrix Keyboard | 10x Resistor(1kΩ) |
| 1x Breadboard Power Supply Module | 5x Resistor(10kΩ) |
| 1x 40 pin GPIO Extension Board | 2x Potentiometer (10KΩ) |
| 1x 40 pin GPIO Cable | 5x Capacitor (104) |
| 2x Light Sensor (Photoresistor) |
2x Capacitor (10uF) |
| 1x Analog Temperature Sensor (Thermistor) |
2x 1N4148 Diode |
| 1x Relay | 2x 1N4001 Diode |
| 1x Active Buzzer | 4x NPN Transistor (8050) |
| 1x Passive Buzzer | 4x PNP Transistor (8550) |
| 1x 7-Segment Display | 1x Breadboard |
| 1x 4-bit 7-segment Display | 40x Male to Male Jumper Wires |
| 1x LED Bar Graph Display | 20x Male to Female Jumper Wires |
| 1x Dot-matrix Display | 20x Female to Female Jumper Wires |
| 2x 74HC595 | 1x Header (40pin) |
| 1x Band Resistor Card | 1x Project Box |
