DT200 Double Decker Tank ESPduino WIFI RC Robot Tank Compatible With Arduino UNO R3

A: Gold Chassis
B: Gold Chassis + Espduino kit
C: Gold Chassis + NodeMcu Lua kit

D: Silver Chassis
E: Silver Chassis + Espduino kit
F: Silver Chassis + NodeMcu Lua kit

Some usefull links:

ESPduino link (including doitcar Arduino firmware):
https://bbs.smartarduino.com/forumdisplay.php?fid=14
2-way & 16-way motor shield:
https://bbs.smartarduino.com/forumdisplay.php?fid=23
APP and how to use the car:
https://bbs.smartarduino.com/forumdisplay.php?fid=16
Installation for tank chassis:
https://bbs.smartarduino.com/forumdisplay.php?fid=21

Introduction:
 
This tank chassis named T200 can be controlled by ESPduino development kit, which is completely compatible with Arduino UNO R3 attached with WIFI module. When you get it, you can remote control the tank chassis by using the WIFI mode after you install the car chassis. By using ESPduino development board kit, you can control the 2-way motor and 16-way servos at the same time. So, this kit is usually use to control the mobile robot arm.
 
Specifications:
 
Name: ESPduino T200 Intelligent track car/tank chassis
Material: aluminum alloy
Wheel: metal
Track: plastic
Product size: about 300*220*55mm (length * width * height)
Weight: 1400g
Color:golden yellow/silver
Control mode: WIFI
Control distance: about 100m.
 
Motor Parameters:
 
Name: 25mm gear motor
Output speed: 150±10%rpm
No_load current: 200mA (Max)
Stall current: 4500mA(max)
Stall torque: 9.5kgNaN
Rated speed: 100±10%rpm
Rated torque: 3000gNaN
Rated current: 1200mA (Max)
Noise :56dB
Working voltage: 9V
Outside Shaft Length: 14.5mm
Shaft End Play: 0.05-0.50mm
Screw Size: M3.0
Diameter Of Shaft phi 4mm, D3.5
Encoder: 2pulses/circle
Working voltage for sensor: 3-5V
 

Note:
 
For the shipping convenience, the tank/car chassis is not assembled.
Track can be connected by any length with a needle.
 
Package included:
 
1 x Tank/ Car Chassis (including motor)
1 x ESPduino development board
1 x 2-way & 16-way servo shield