ESPDuino Development Board ESP-13 UNO R3 With Wifi From ESP8266

$13.40

Local Warehouse
Cheapest Prices Worldwide
Fast Postage Available
100% Customer Satisfaction
Quality Guarantee
Buy Direct From Supplier
 
Hurry up! Just 10 items left in stock

ESPDuino Development Board ESP-13 UNO R3 With Wifi From ESP8266

Manul for Installation ESPduino: https://bbs.smartarduino.com/showthread.php?tid=2034

Introduction:

DC: 3.3-5V

ESPduino is developed by Doit company based on the ESP8266 ESP-13, which can be compatible with Arduino UNO R3 developmen board. 
By using the ESP8266 WiFi and MCU,ESPduino supports WiFi. Compared to the traditional Arduino UNO development baord, users don't have to buy another WiFi development board.
 
Shipping List:
 
1 x ESPduino

 

ESPduino IDE Installation

1. Download the Arduino IDE
https://en.doit.am/espduino.php

2. Choose the port by the computer

3. Open the IDE

4. Test the Blink

5. Upload the Arduino code to ESPduino development board. 

Press FLASH button (don't loose hand)->Press RST button (for about 6s)->Click "Upload".
Or 

you can build up the Arduino IDE by the following github link.

https://github.com/esp8266/Arduino#installing-with-boards-manager

 

Note that, the newest updated information, also can visit the above github link.

#include #include  
const char* ssid = "Doit";
const char* password = "doit3305";
 
int timezone = 3;
int dst = 0;
 
void setup() {
  Serial.begin(115200);
  Serial.setDebugOutput(true);
 
  WiFi.mode(WIFI_STA);