Features:
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
Powering off the Raspberry after save shutdown
Powering on the Raspberry after the Button is pressed again
LED light indicating the current state: On / Shutdown / Off
Easy to setup
Dimension: 65mm x 30 mm x 20mm
Parameters:
| Function | BCM | RPi |
| Disk Status | 21 | Pin 40 |
| Shut Down | 24 | Pin 18 |
| PWR Status | 26 | Pin 37 |
| GND | N/A | Pin 6/9/14/20/25/30/34/39 |
| 5V | 5V | Pin 2/4 |
Note:
The Raspberry Pi main board, connecting cable and battery are not included.
Package included:
1 x Power Button Module
1 x IR Remote Control
