Auto / Normal / Single trig modes
Rising / Falling edge trigger
External trig available
Trigger output is available, which makes it possible to cascade scopes to do multi-channel capture.
Trigger level adjustable with indicator
Hold / run feature
Save / recall up to 6 captures
FFT function available – size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable
Transfer screen to PC as bitmap file via serial connection
Built-in 500Hz / 5Vpp test signal
Frequency Meter (For TTL level input signal)
Auto switching between Oscilloscope Mode and Frequency Meter Mode
9V DC power supply
Specification:
Maximum equivalent-time sampling rate (repetitive signal): – 20MSa / s
Maximum real-time sampling rate: – 2MSa / s
Resolution: – 8 bits
Record length: – 256 bytes
Analog bandwidth: – 1MHz
Vertical sensitivity: – 100mV / Div – 5V / Div
Vertical position adjustable with indicator
Input impedance: – 1M ohm
Max input voltage: – 50Vpk (1x probe) [500Vpk for 10x probe]
DC / AC / GND coupling
Horizontal: – 0.5us / Div – 10m (minute) / Div
Dimension: 110mm X 65mm X 25mm (without case)
Dimension: 110mm X 65mm X 25mm (without case)
Package included:
1 x DIY Digital Oscilloscope Kit DSO062 DIY Kit
Test, for reference only:
