Description:

This product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),
high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.

The envelope detection principle:

Feature:

1. Maximum input: 20dBm
2. Detection output: The default is positive
3. Working Frequency: 0.1-3200MHz
4. RC Filter: R = 10K, C = 1nF; (two elements in parallel output ports)
If you want to lower operating frequency, you can increase the capacitor of the output, if you want fast response, then need to reduce capacity, it is a contradiction that can be configured according to your needs.