SIM5320E 3G Module GSM GPRS SMS Development Board With GPS PCB Antenna For Arduino

SIM5320E 3G Module GSM GPRS SMS Development Board With GPS PCB Antenna For Arduino

Program provided:

1 Send a Chinese message
2 Send a English message
3 Make a phone call, hang up automatically after 1 minute
4 Specifies the content of the message received, control the LED OFF
5 Detection the module is registered to a network, whether to read SIM card, and send message
6 Through GPRS, connect to the specified server and send the specified data
7 Provide information of dormant power consumption at about 10 ma.

Feature:

Power Supply: DC 5V 1A or 1A above.
Communication interface: A set of TTL level serial port, compatible with 5V, 3.3V microcontroller; A set of USB interface for direct connection to the computer debugging.
GPS antenna interface: A set IPXmini antenna interface, the connection active GPS antenna.
GMS antenna interface: A set IPXmini antenna interface, default PCB antenna.
SIM card interface: Drawer SIM card interface.
USB Interface: mini USB interface.
Mic voice interface: For leads, the interface is a 2.54 * 4P single row of needle.
Other interfaces: A set IIC interface, a set for controling the module opening and closing interface (the default automatic start).
Indicator: A 0603 LED, for indicating the operating state of the module, a 0603 LED, for network status indication for the module.

SIM5320E chip:

Package includes:

1 x SIM5320E 3G Module
1 x 3G PCB antenna
1 x GPS antenna
1 x IPX-SMA cable