Overview:
For Use With: Raspberry Pi Model 3 Model B / 2B / B+
Operating System:
Moode Audio Player
– OSMC
– Openelec
– Raspbian Jessie
– Volumio
– Rune audio
– Pi Core Player
Features:
– Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
– Used the ESS Technology Sabre premier stereo DAC ES9023
– ES9023 delivers jitter-free studio quality audio with 112dB DNR
– Ultra-low-jitter 50MHz clock generator
– Used the Texas Instruments ultra-low-noise voltage regulator
– Used the Texas Instruments ClassD amplifier chipset (TPA3118)
– Up to 2x35w of crystal clear amplification
– Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
– Gold-plated RCA connectors
– Volume control knob
– Selected high quality components (Solid Capacitors, Murata MLCC etc)
– Connects directly to the Raspberry Pi
– Can be used individually with only 3 wire I2S signal connected from other i2s interface
– AMP can be enabled / disabled with jumper link
– Powers the Raspberry Pi – no additional power supply
– Duplicated Raspberry Pi HDMI port
– Easy DIY with Raspberry Pi
Specification:
– Power supply: Width volumn input DC 6V-24V, Min. 3A current;
– Input Ports: 1 x HDMI
– Three wire Raspberry Pi I2S Input (LRCK – GPIO19, BCK – GPIO18, DATA – GPIO21, GND)
– Output Ports: 1 x HDMI, 2 x RCA connectors
– Analog audio output level: 2V RMS
– Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
– Amplifier output Power: 2 x 35w (4 Ohm 24Vdc)
Click for more updated information and details
Note:
The raspberry pi main board is not included.
Package included:
1 x X5000 Expansion Board
1 x HDMI Adapter
1 x Power Switch
1 x Volume Control Board
1 x Speaker Connection Wire
1 x Install Screws Pack
