X6000-7.1CH Audio Expansion Board for Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

Operating System:    

– OSMC(2.0 stereo audio / 5.1 channel surround  sound  / 7.1 channel surround sound)
– Moode Audio Player(2.0 stereo audio outputs)
– Raspbian Jessie(2.0 stereo audio outputs)
– Openelec(To be tested)
– Volumio(To be tested)
– Rune audio(To be tested)
– Pi Core Player(To be tested)
     
Features:    

– Ideal for Home Theater Systems
– Ideal for 7.1 channel surround audio systems
– Used four ESS Tech Sabre premier stereo DACs ES9023
– ES9023 delivers jitter-free studio quality audio with 112dB DNR
– Each DAC has independent ultra-low-jitter clock generator
– Used the Texas Instruments ultra-low-noise voltage regulator
– Supports up to 1TB 2.5-inch SATA hard drives
– High quality video performance
– Supports SPDIF Optical Digital Audio
– Supports HDMI high-bit-rate (HBR) audio
– 4 analog stereo 3.5mm jack outputs
– Selected high quality components (Solid Capacitors, Murata MLCC etc)
– Allows you to split the audio stream from a HDMI signal
– No HDMI output connection is required to receive audio at the analog and optical outputs
– Connects directly to the Raspberry Pi
– Powers the Raspberry Pi – no additional power supply
– Access to Raspberry Pi GPIO
– Easy DIY with Raspberry Pi
     
Specification:    

– Power supply: +5Vdc +/-5%
– Input Ports: 1 x HDMI
– Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
– Analog audio output level: 2V RMS
– Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
– HDMI Audio Format: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus Dolby TrueHD, and DTS-HD Master Audio
– Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
    
Click for more updated information and details

Note:

The raspberry pi main board is not included.

Package included:

1 x X6000-7.1CH Expansion Board
1 x HDMI Bridge
1 x Install Screws Pack