Feature:
This product is suitable for 6-60V battery charging control, can be set free to start charging voltage and stop charging voltage!
In the IN input charger 660V voltage, in the OUT terminal battery, for example, set 12V start 15V stop when the voltage is below 12V, when the relay is closed to the charger charging voltage to the battery, when the charge voltage is greater than 15V relay off to stop charging, can be used in household chargers, solar and wind turbines.
Product Introduction:
Name: numerical control battery charging control module
Model: XH-M604
Input voltage: DC 6-60V (max 80V)
Display precision: 0.1V
Control precision: 0.1V
Output type:direct output
Voltage tolerance: +/-0.1V
Application fields: 6-60V storage battery
Size: 80 x 53 x 20mm (Manual measurement, it is inevitable there will be 1 – 3mm error)
Using Method:
1. Set starting Voltage: in normal display voltage state,press the button will display start charging voltage
long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2. Set Stop Voltage:in normal display voltage state, press the button will display stoping charge voltage
long press the button for 3s the digital tube will flash, you can start or stop button to set stoping charge voltage value
3. Factory Reset: in power on state press the start / stop button at the same time,
digital tube will display 888;that represents factory reset settings
Package includes:
1 x XH-M604 Battery Charger Control Module
